Adata release XPG Gammix S70 Blade SSD with data transfer rate of 7400 MB/s

Adata has announced the release of the XPG Gammix S70 Blade SSD. Readers with a good memory may remember that a product with a similar name XPG Gammix S70 was presented last fall. The similarities are not accidental. New – a variation of the original model.

As before, the M.2 2280 SSD is PCIe Gen4 x4 and supports NVMe 1.4 protocol. In the sequential read mode, the data transfer rate reaches 7400 MB / s, in the sequential write mode – 6400 MB / s. SLC and DRAM caching are applied to improve performance.

Join our channel on Telegram

However, if a feature of the XPG Gammix S70 was a massive aluminum heat spreader CoolArmor of its own design XPG, then in the XPG Gammix S70 Blade a thin plate-shaped heat spreader is responsible for cooling.

In the specifications, the dimensions of the SSD are indicated as 80 x 22 x 4.3 mm, but most likely this does not take into account the thickness of the heatsink, because the manufacturer gives the same dimensions for the XPG Gammix S70.

XPG Gammix S70 Blade drives are available in 1 TB and 2 TB sizes. They use 3D NAND flash memory. The manufacturer does not provide the controller model, resource, and prices. The drives are backed by a five-year warranty.

|Via|