MediaTek announced today that the new MediaTek 5G platform T830 has been newly released. As a highly integrated system-on-chip, the T830 uses a 4nm process and an Arm Cortex-A55 quad-core CPU. Integrated M80 5G modem and supports 3GPP R16 standard.
The MediaTek T830 platform adopts a highly integrated and compact design, which not only reduces the overall power consumption of the platform, but also helps equipment manufacturers reduce development costs, shorten product development cycles, and accelerate time-to-market.
JOIN TIP3X ON TELEGRAM
The T830 supports full-band Sub-6GHz 5G networks, delivering 5G rates up to 7Gbps, allowing operators to use existing cellular network infrastructure to reduce the cost of laying cables or fibers. The T830 can be used to create small-scale 5G network equipment that is easy to use, more mobile and portable, and provides a high-speed 5G experience for end users.
Moreover, the MediaTek T830 platform is a highly integrated system-on-chip (SoC) that integrates the M80 5G modem and supports the 3GPP R16 standard. T830 adopts Arm Cortex-A55 quad-core CPU, equipped with Sub-6GHz full-band RF transceiver, GNSS receiver, and power management system, built-in hardware-level MediaTek network acceleration engine (Network Processing Unit) and Wi-Fi network acceleration engine ( Wi-Fi Offload Engine), which can provide gigabit-level throughput performance for 5G cellular network transmission to Ethernet or Wi-Fi without increasing CPU load.
T830 also supports MediaTek 5G UltraSave power saving technology to reduce 5G communication power consumption and provide high-performance, high-speed, and energy-efficient communication solutions. Vendors can pair the T830 with MediaTek Filogic wireless connectivity solutions: For 5G fixed wireless access (FWA) devices, the T830 can be used with the Filic 680 (tri-band 4×4 Wi-Fi 7); for 5G mobile hotspot devices, the T830 Can be used with Filicic 380 (dual-band 2×2 Wi-Fi 7). These solutions support advanced Wi-Fi 7 features such as MLO Multi-Link Operation and 320MHz wide channel support.
Features of the MediaTek T830 platform also include:
-
The MediaTek M80 modem on the T830 supports the MediaTek 5G UltraSave power-saving technology, which can optimize the working mode according to the 5G network environment and reduce the power consumption of 5G communication.
-
The M80 modem supports 5G NSA/SA networking and can support 5G FR four-carrier aggregation in mixed modes of FDD and TDD.
-
It can support a 5G dual card dual standby (DSDS) function.
-
In terms of interfaces, the T830 supports three PCI-Express, USB 3.2, two USXGMII interfaces up to 10GbE, and supports RJ11 telephone lines through the PCM/SPI interface.
-
3D graphics and display drivers are supported.
-
Supports open source software such as RDK-B, prplOS, and OpenSync, and complies with operators’ open operating system framework specifications.
